vin-number

CUMMINS

CUMMINS X15 0

Cummins Inc. (Cummins) is recalling certain ISX15 diesel engines, part number D103012BX03, and X15 diesel engines, part number D103016BX03. These engines have nylon fuel lines and were built with a banjo bolt containing an integrated single screen filter on the fuel pump. The fuel pump cooling circuit screens may become restricted by debris from filtration material causing the fuel line to burst when the vehicle is operated under certain driving conditions, such as on a long down-hill grade.
CUMMINS X15 0

Cummins Inc. (Cummins) is recalling certain ISX15 diesel engines, part number D103012BX03, and X15 diesel engines, part number D103016BX03. These engines have nylon fuel lines and were built with a banjo bolt containing an integrated single screen filter on the fuel pump. The fuel pump cooling circuit screens may become restricted by debris from filtration material causing the fuel line to burst when the vehicle is operated under certain driving conditions, such as on a long down-hill grade.
CUMMINS ISX15 0

Cummins Inc. (Cummins) is recalling certain ISX15 diesel engines, part number D103012BX03, and X15 diesel engines, part number D103016BX03. These engines have nylon fuel lines and were built with a banjo bolt containing an integrated single screen filter on the fuel pump. The fuel pump cooling circuit screens may become restricted by debris from filtration material causing the fuel line to burst when the vehicle is operated under certain driving conditions, such as on a long down-hill grade.
CUMMINS ISX15 0

Cummins Inc. (Cummins) is recalling certain ISX15 diesel engines, part number D103012BX03, and X15 diesel engines, part number D103016BX03. These engines have nylon fuel lines and were built with a banjo bolt containing an integrated single screen filter on the fuel pump. The fuel pump cooling circuit screens may become restricted by debris from filtration material causing the fuel line to burst when the vehicle is operated under certain driving conditions, such as on a long down-hill grade.
CUMMINS L9 0

Cummins, Inc. (Cummins) is recalling certain L9 heavy duty diesel engines, part number D563018BX03, sold for installation in Pierce fire trucks. On some engines, the capscrews that secure the flexplate may not have been properly tightened resulting in the flexplate separating.
CUMMINS X15 0

Cummins, Inc. (Cummins) is recalling certain X15 heavy duty diesel engines used in trucks, fire trucks and recreational vehicles. The affected engines have a fuel pump whose drive gear may slip on its drive shaft, resulting in a loss of fuel pump function.
CUMMINS ISV5.0 0

Cummins, Inc. (Cummins) is recalling certain ISV5.0 light duty diesel engines installed exclusively in Tiffin Breeze motorhomes. The fan support bearing may fail, possibly resulting in the loss of fuel pump function, causing the engine to stall.
CUMMINS ISX12 0

Cummins Inc. (Cummins) is recalling certain ISX12, part number 4358814 and ISX15, part numbers 5317106 and 4358814, engines manufactured from March 7, 2016, through April 12, 2016. These engines have an Engine Control Module (ECM) that may short circuit and blow a fuse, resulting in the engine stalling without warning. If this occurs, the engine cannot be restarted until the ECM and fuse are replaced.
CUMMINS ISX15 0

Cummins Inc. (Cummins) is recalling certain ISX12, part number 4358814 and ISX15, part numbers 5317106 and 4358814, engines manufactured from March 7, 2016, through April 12, 2016. These engines have an Engine Control Module (ECM) that may short circuit and blow a fuse, resulting in the engine stalling without warning. If this occurs, the engine cannot be restarted until the ECM and fuse are replaced.
CUMMINS ISX12 0

Cummins Inc. (Cummins) is recalling certain ISB6.7, ISL9, ISX12 and ISX15 engines. The affected engines have an Engine Control Module (ECM) that may short circuit and blow a fuse resulting in the engine stalling without warning.
CUMMINS ISX15 0

Cummins Inc. (Cummins) is recalling certain ISB6.7, ISL9, ISX12 and ISX15 engines. The affected engines have an Engine Control Module (ECM) that may short circuit and blow a fuse resulting in the engine stalling without warning.
CUMMINS ISB6.7 0

Cummins Inc. (Cummins) is recalling certain ISB6.7, ISL9, ISX12 and ISX15 engines. The affected engines have an Engine Control Module (ECM) that may short circuit and blow a fuse resulting in the engine stalling without warning.
CUMMINS ISB6.7 0

Cummins Inc. (Cummins) is recalling certain ISB6.7, ISL9, ISX12 and ISX15 engines. The affected engines have an Engine Control Module (ECM) that may short circuit and blow a fuse resulting in the engine stalling without warning.
CUMMINS ISB6.7 0

Cummins Inc. (Cummins) is recalling certain ISB6.7, ISL9, ISX12 and ISX15 engines. The affected engines have an Engine Control Module (ECM) that may short circuit and blow a fuse resulting in the engine stalling without warning.
CUMMINS ISL9 0

Cummins Inc. (Cummins) is recalling certain ISB6.7, ISL9, ISX12 and ISX15 engines. The affected engines have an Engine Control Module (ECM) that may short circuit and blow a fuse resulting in the engine stalling without warning.
CUMMINS QSK50 DUAL FUEL ENGINE 0

Cummins Inc. (Cummins) is recalling certain QSK50 Tier 2 Dual Fuel Engines manufactured January 15, 2013, through January 15, 2015, designed for use on oil well fracturing rigs. These dual fuel engines may operate on either diesel fuel plus gaseous fuel or diesel fuel only. The gaseous fuel inlet connection elbow for the engines may crack, causing a fuel leak during engine operation.
CUMMINS ISB6.7 0

Cummins is recalling certain model ISB6.7 diesel engines manufactured from February 16, 2010, through May 4, 2012, equipped with fan pulley Part Number 3914462 and installed on certain Thomas Built Buses, Inc. school buses. The subject fan pulley is part of the accessory drive system on the front of the engine. This system is used to drive such components as the refrigerant compressors, the radiator fan, and the engine water pump. The web of the pulley can fatigue over time, causing the pulley to fail.
CUMMINS ISX15 0

CUMMINS IS RECALLING CERTAIN ISB6.7, ISC8.3, ISL9, ISX11.9, AND ISX15 ENGINES SHIPPED FROM SEPTEMBER 2010 THROUGH DECEMBER 2010 TO VARIOUS VEHICLE MANUFACTURERS. THESE ENGINES WERE INSTALLED IN RECREATIONAL VEHICLES, EMERGENCY VEHICLES, BUSES, AND CERTAIN TRUCK APPLICATIONS. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
CUMMINS ISX11.9 0

CUMMINS IS RECALLING CERTAIN ISB6.7, ISC8.3, ISL9, ISX11.9, AND ISX15 ENGINES SHIPPED FROM SEPTEMBER 2010 THROUGH DECEMBER 2010 TO VARIOUS VEHICLE MANUFACTURERS. THESE ENGINES WERE INSTALLED IN RECREATIONAL VEHICLES, EMERGENCY VEHICLES, BUSES, AND CERTAIN TRUCK APPLICATIONS. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
CUMMINS ISC8.3 0

CUMMINS IS RECALLING CERTAIN ISB6.7, ISC8.3, ISL9, ISX11.9, AND ISX15 ENGINES SHIPPED FROM SEPTEMBER 2010 THROUGH DECEMBER 2010 TO VARIOUS VEHICLE MANUFACTURERS. THESE ENGINES WERE INSTALLED IN RECREATIONAL VEHICLES, EMERGENCY VEHICLES, BUSES, AND CERTAIN TRUCK APPLICATIONS. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
CUMMINS ISB6.7 0

CUMMINS IS RECALLING CERTAIN ISB6.7, ISC8.3, ISL9, ISX11.9, AND ISX15 ENGINES SHIPPED FROM SEPTEMBER 2010 THROUGH DECEMBER 2010 TO VARIOUS VEHICLE MANUFACTURERS. THESE ENGINES WERE INSTALLED IN RECREATIONAL VEHICLES, EMERGENCY VEHICLES, BUSES, AND CERTAIN TRUCK APPLICATIONS. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
CUMMINS ISL9 0

CUMMINS IS RECALLING CERTAIN ISB6.7, ISC8.3, ISL9, ISX11.9, AND ISX15 ENGINES SHIPPED FROM SEPTEMBER 2010 THROUGH DECEMBER 2010 TO VARIOUS VEHICLE MANUFACTURERS. THESE ENGINES WERE INSTALLED IN RECREATIONAL VEHICLES, EMERGENCY VEHICLES, BUSES, AND CERTAIN TRUCK APPLICATIONS. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
CUMMINS ISX CM871 0

CUMMINS IS RECALLING 912 ISB CM2150, ISC CM2150, ISL CM2150, ISM CM876, AND ISX CM871 MODEL DIESEL ENGINES INSTALLED AS ORIGINAL EQUIPMENT IN VARIOUS EMERGENCY VEHICLES. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
CUMMINS ISC CM2150 0

CUMMINS IS RECALLING 912 ISB CM2150, ISC CM2150, ISL CM2150, ISM CM876, AND ISX CM871 MODEL DIESEL ENGINES INSTALLED AS ORIGINAL EQUIPMENT IN VARIOUS EMERGENCY VEHICLES. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
CUMMINS ISL CM2150 0

CUMMINS IS RECALLING 912 ISB CM2150, ISC CM2150, ISL CM2150, ISM CM876, AND ISX CM871 MODEL DIESEL ENGINES INSTALLED AS ORIGINAL EQUIPMENT IN VARIOUS EMERGENCY VEHICLES. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
CUMMINS ISB CM2150 0

CUMMINS IS RECALLING 912 ISB CM2150, ISC CM2150, ISL CM2150, ISM CM876, AND ISX CM871 MODEL DIESEL ENGINES INSTALLED AS ORIGINAL EQUIPMENT IN VARIOUS EMERGENCY VEHICLES. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
CUMMINS ISM CM876 0

CUMMINS IS RECALLING 912 ISB CM2150, ISC CM2150, ISL CM2150, ISM CM876, AND ISX CM871 MODEL DIESEL ENGINES INSTALLED AS ORIGINAL EQUIPMENT IN VARIOUS EMERGENCY VEHICLES. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
CUMMINS ISM CM876 0

CERTAIN CUMMINS ISM CM876 (EPA-07) DIESEL ENGINES PRODUCED FOR ON HIGHWAY VEHICLE APPLICATIONS FROM APRIL 1, 2006, THROUGH MARCH 21, 2007, WITH SERIAL NUMBERS RANGING FROM 35157011 TO 35192741. THE ELECTRONIC CONTROL MODULE FAILS TO RECOGNIZE INPUTS OF THE VEHICLE ELECTRONIC CONTROL UNIT OR FROM A DRIVER ACTUATED DASH SWITCH THEREBY INCREASING THE RISK OF UNINTENDED (OR UNEXPECTED) ELEVATED EXHAUST TEMPERATURES.
CUMMINS ISL CM850 0

CERTAIN ISL CUMMINS CM850 DIESEL ENGINES PRODUCED FOR RECREATIONAL VEHICLE APPLICATIONS BETWEEN OCTOBER 17, 2005, AND APRIL 18, 2006, WITH ENGINE SERIAL NUMBER RANGE FROM 46543077 TO 46603939. THE CONNECTING ROD CONTAINS A MACHINING DEFECT IN THE WRIST PIN BUSHING OF THE ROD THAT COULD CAUSE SEIZURE OF THE PISTON PIN.
CUMMINS ICON 0

CERTAIN CUMMINS ICON SERVICE TOOL 2.2 USED TO FACILITATE TROUBLE SHOOTING OF ICON SYSTEMS ON CUMMINS ISX AND ISM ENGINES. THE ICON SERVICE TOOL 2.2 CAN CAUSE UNINTENDED ENGINE START-UP WHEN USED WITH AN INLINE 11 ADAPTOR AND CERTAIN LAPTOP COMPUTERS.