MAURER
-
MAURER GT 1701 2008
MAURER IS RECALLING 4 MY 2008 GT 1693, GT 1677, GT 1702, AND GT 1701 GRAIN TRAILERS EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WITH SUSPECT WHEEL END STUDS. THE SUSPECT WHEEL END STUDS WERE IMPROPERLY TEMPERED, POTENTIALLY RENDERING THEM BRITTLE AND SUSCEPTIBLE TO FRACTURE. IF ONE WHEEL STUD FRACTURES, THE REMAINING WHEEL STUDS ARE REQUIRED TO CARRY MORE LOAD. IF LEFT IN THIS CONDITION, THE REMAINING WHEEL STUDS MAY ALSO FRACTURE EVEN IF THEY ARE PROPERLY MANUFACTURED.
-
MAURER GT 1702 2008
MAURER IS RECALLING 4 MY 2008 GT 1693, GT 1677, GT 1702, AND GT 1701 GRAIN TRAILERS EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WITH SUSPECT WHEEL END STUDS. THE SUSPECT WHEEL END STUDS WERE IMPROPERLY TEMPERED, POTENTIALLY RENDERING THEM BRITTLE AND SUSCEPTIBLE TO FRACTURE. IF ONE WHEEL STUD FRACTURES, THE REMAINING WHEEL STUDS ARE REQUIRED TO CARRY MORE LOAD. IF LEFT IN THIS CONDITION, THE REMAINING WHEEL STUDS MAY ALSO FRACTURE EVEN IF THEY ARE PROPERLY MANUFACTURED.
-
MAURER GT 1677 2008
MAURER IS RECALLING 4 MY 2008 GT 1693, GT 1677, GT 1702, AND GT 1701 GRAIN TRAILERS EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WITH SUSPECT WHEEL END STUDS. THE SUSPECT WHEEL END STUDS WERE IMPROPERLY TEMPERED, POTENTIALLY RENDERING THEM BRITTLE AND SUSCEPTIBLE TO FRACTURE. IF ONE WHEEL STUD FRACTURES, THE REMAINING WHEEL STUDS ARE REQUIRED TO CARRY MORE LOAD. IF LEFT IN THIS CONDITION, THE REMAINING WHEEL STUDS MAY ALSO FRACTURE EVEN IF THEY ARE PROPERLY MANUFACTURED.
-
MAURER GT 1693 2008
MAURER IS RECALLING 4 MY 2008 GT 1693, GT 1677, GT 1702, AND GT 1701 GRAIN TRAILERS EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WITH SUSPECT WHEEL END STUDS. THE SUSPECT WHEEL END STUDS WERE IMPROPERLY TEMPERED, POTENTIALLY RENDERING THEM BRITTLE AND SUSCEPTIBLE TO FRACTURE. IF ONE WHEEL STUD FRACTURES, THE REMAINING WHEEL STUDS ARE REQUIRED TO CARRY MORE LOAD. IF LEFT IN THIS CONDITION, THE REMAINING WHEEL STUDS MAY ALSO FRACTURE EVEN IF THEY ARE PROPERLY MANUFACTURED.
-
MAURER TRAILER 2000
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NO. 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.