MEDTEC
-
MEDTEC AMBULANCE 2011
Medtec is recalling certain model year 2009-2011 Ambulances (Type I, Type I-AD, Type II, Type III, and Type III-AD) manufactured from January 2, 2009, through May 1, 2011. If an attendant lands on the bench top with great force, such as when the vehicle hits a bump in the road, the bench top screws may loosen and pull out.
-
MEDTEC AMBULANCE 2010
Medtec is recalling certain model year 2009-2011 Ambulances (Type I, Type I-AD, Type II, Type III, and Type III-AD) manufactured from January 2, 2009, through May 1, 2011. If an attendant lands on the bench top with great force, such as when the vehicle hits a bump in the road, the bench top screws may loosen and pull out.
-
MEDTEC AMBULANCE 2009
Medtec is recalling certain model year 2009-2011 Ambulances (Type I, Type I-AD, Type II, Type III, and Type III-AD) manufactured from January 2, 2009, through May 1, 2011. If an attendant lands on the bench top with great force, such as when the vehicle hits a bump in the road, the bench top screws may loosen and pull out.
-
MEDTEC TYPE II (VAN) 2010
MEDTEC IS RECALLING CERTAIN MODEL YEAR 2010 AMBULANCE TYPE II VANS FOR NOT COMPLYING WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, SEATING SYSTEMS, AND FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, SEAT BELT ASSEMBLY ANCHORAGES. THE REAR FACING AMBULANCE ATTENDANT SEAT UTILIZES A STEEL FLOOR REINFORCEMENT PLATE ON THE BOTTOM SIDE OF THE ALUMINUM FLOOR SUBSTRUCTURE AND THE REINFORCEMENT PLATE WAS OMITTED IN SOME AMBULANCE BODIES.
-
MEDTEC TYPE II (VAN) 2010
MEDTEC IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 AMBULANCES MANUFACTURED FROM SEPTEMBER 14, 2007, THROUGH APRIL 15, 2010. THE REAR FACING AMBULANCE ATTENDANT SEAT WAS NOT EQUIPPED WITH A TYPE 2 SEAT BELT ASSEMBLY, AND SO THE VEHICLES FAIL TO COMFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, OCCUPANT CRASH PROTECTION.
-
MEDTEC TYPE II (VAN) 2009
MEDTEC IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 AMBULANCES MANUFACTURED FROM SEPTEMBER 14, 2007, THROUGH APRIL 15, 2010. THE REAR FACING AMBULANCE ATTENDANT SEAT WAS NOT EQUIPPED WITH A TYPE 2 SEAT BELT ASSEMBLY, AND SO THE VEHICLES FAIL TO COMFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, OCCUPANT CRASH PROTECTION.
-
MEDTEC TYPE II (VAN) 2007
MEDTEC IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 AMBULANCES MANUFACTURED FROM SEPTEMBER 14, 2007, THROUGH APRIL 15, 2010. THE REAR FACING AMBULANCE ATTENDANT SEAT WAS NOT EQUIPPED WITH A TYPE 2 SEAT BELT ASSEMBLY, AND SO THE VEHICLES FAIL TO COMFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, OCCUPANT CRASH PROTECTION.
-
MEDTEC TYPE II (VAN) 2008
MEDTEC IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 AMBULANCES MANUFACTURED FROM SEPTEMBER 14, 2007, THROUGH APRIL 15, 2010. THE REAR FACING AMBULANCE ATTENDANT SEAT WAS NOT EQUIPPED WITH A TYPE 2 SEAT BELT ASSEMBLY, AND SO THE VEHICLES FAIL TO COMFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, OCCUPANT CRASH PROTECTION.
-
MEDTEC PD-168 2009
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC PD-168 2008
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC PD-168 2007
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC FD-160 2007
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC FD-160 2008
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC FD-160 2009
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC AD-170 2009
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC AD-170 2008
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC AD-170 2007
MEDTEC AMBULANCE IS RECALLING CERTAIN MODEL YEAR 2007-2009 AD-170, FD-160 AND PD-168 AMBULANCES EQUIPPED WITH CARRIER AIRV CEILING UNITS, MODEL NOS. 68RV0010BA, 68RV0012CA, AND 68RV0010EA. THE HEATER ELEMENT IN THESE ASSEMBLIES MAY BE DEFECTIVE WHICH COULD CAUSE THE UNIT TO CREATE SMOKE OR SPARKS.
-
MEDTEC AMBULANCE 2009
MEDTEC IS RECALLING 72 MY 2007-2009 ADDITIONAL DUTY AMBULANCES. THE SEAT BELT ANCHORS FOR THE SQUAD BENCH ARE FASTENED TO THE SIDEWALL OF THE AMBULANCE BODY, USING 1/4-20 SELF-THREADING MACHINE SCREWS. IN SOME CASES, INCORRECT MOUNTING SCREWS WERE INSTALLED. THE SEAT BELT ANCHORS COULD PULL FREE OF THE WALL MOUNTING.
-
MEDTEC AMBULANCE 2008
MEDTEC IS RECALLING 72 MY 2007-2009 ADDITIONAL DUTY AMBULANCES. THE SEAT BELT ANCHORS FOR THE SQUAD BENCH ARE FASTENED TO THE SIDEWALL OF THE AMBULANCE BODY, USING 1/4-20 SELF-THREADING MACHINE SCREWS. IN SOME CASES, INCORRECT MOUNTING SCREWS WERE INSTALLED. THE SEAT BELT ANCHORS COULD PULL FREE OF THE WALL MOUNTING.
-
MEDTEC AMBULANCE 2007
MEDTEC IS RECALLING 72 MY 2007-2009 ADDITIONAL DUTY AMBULANCES. THE SEAT BELT ANCHORS FOR THE SQUAD BENCH ARE FASTENED TO THE SIDEWALL OF THE AMBULANCE BODY, USING 1/4-20 SELF-THREADING MACHINE SCREWS. IN SOME CASES, INCORRECT MOUNTING SCREWS WERE INSTALLED. THE SEAT BELT ANCHORS COULD PULL FREE OF THE WALL MOUNTING.
-
MEDTEC AMBULANCE 2003
ON CERTAIN AMBULANCES, A DIODE IN THE ANTI-LOCK BRAKING SYSTEM (ABS) MODULE MAY EXPERIENCE AN ELECTRICAL SHORT.
-
MEDTEC AMBULANCE 2003
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 2002
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 2001
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 2000
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 1999
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 1998
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 1997
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 1996
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.
-
MEDTEC AMBULANCE 1995
ON CERTAIN AMBULANCES, THE SEAT BELT ANCHORS FOR THE SQUAD BENCH COULD PULL OUT FROM THE WALL.