SPEC TEC
-
SPEC TEC AD 1998
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AD 1997
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AD 1996
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AD 1995
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SW 1998
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SW 2000
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SW 1999
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SW 1997
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SW 1996
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SW 1995
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SE 2000
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SE 1999
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SE 1998
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SE 1997
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SE 1996
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SE 1995
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SD 2000
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SD 1999
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SD 1998
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SD 1997
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SD 1996
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC SD 1995
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AW 2000
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AW 1999
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AW 1998
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AW 1997
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AW 1996
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AW 1995
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AE 2000
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
SPEC TEC AE 1999
ON CERTAIN TRAILERS EQUIPPED WITH SEALCO SPRING BRAKE CONTROL VALVE ASSEMBLIES INCORPORATED IN ARVINMERITOR AXLES, PART NOS. 110700 AND 110800, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.