HARLEY-DAVIDSON FLSTN
-
HARLEY-DAVIDSON FLSTN 2007
CERTAIN MOTORCYCLES WERE BUILT WITH A CONDITION THAT PERMITS THE POSITIVE BATTERY CABLE TO CONTACT A WELD BEAD ON THE OIL TANK. THIS MAY CAUSE THE WELD BEAD TO ABRADE THROUGH THE INSULATION ON THE CABLE AND CAUSE AN ELECTRICAL SHORT FROM THE BATTERY THROUGH THE OIL TANK AND OIL LINES.
-
HARLEY-DAVIDSON FLSTN 2002
CERTAIN SOFTAIL MOTORCYCLES FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567, 'CERTIFICATION.' THE VIN/CERTIFICATION LABEL CONTAINS INCORRECT TIRE SIZE AND INFLATION PRESSURES FOR THE FRONT WHEEL. THE LABEL STATES THE TIRE SIZE IS MT90B21 AND THE INFLATION PRESSURE AS 30 PSI, WHEREAS THE CORRECT TIRE SIZE IS MT90B16, AND THE CORRECT INFLATION PRESSURE IS 36 PSI.
-
HARLEY-DAVIDSON FLSTN 2005
CERTAIN SOFTAIL MOTORCYCLES FAIL TO COMPLY WITH THE REQUIREMENTS OF PART 567, 'CERTIFICATION.' THE VIN/CERTIFICATION LABEL CONTAINS INCORRECT TIRE SIZE AND INFLATION PRESSURES FOR THE FRONT WHEEL. THE LABEL STATES THE TIRE SIZE IS MT90B21 AND THE INFLATION PRESSURE AS 30 PSI, WHEREAS THE CORRECT TIRE SIZE IS MT90B16, AND THE CORRECT INFLATION PRESSURE IS 36 PSI.
-
HARLEY-DAVIDSON FLSTN 1991
THE SCREWS ISSUED IN A KIT TO MOUNT THE FENDER AND AN ACCESSORY FRONT BUMPER ONTO THE MOTORCYCLES CAN BREAK, CAUSING THE FENDER AND BUMPER TO LOOSEN AND POSSIBLY CONTACT THE FRONT TIRE.
-
HARLEY-DAVIDSON FLSTN 1990
THE SCREWS ISSUED IN A KIT TO MOUNT THE FENDER AND AN ACCESSORY FRONT BUMPER ONTO THE MOTORCYCLES CAN BREAK, CAUSING THE FENDER AND BUMPER TO LOOSEN AND POSSIBLY CONTACT THE FRONT TIRE.
-
HARLEY-DAVIDSON FLSTN 1989
THE SCREWS ISSUED IN A KIT TO MOUNT THE FENDER AND AN ACCESSORY FRONT BUMPER ONTO THE MOTORCYCLES CAN BREAK, CAUSING THE FENDER AND BUMPER TO LOOSEN AND POSSIBLY CONTACT THE FRONT TIRE.
-
HARLEY-DAVIDSON FLSTN 1988
THE SCREWS ISSUED IN A KIT TO MOUNT THE FENDER AND AN ACCESSORY FRONT BUMPER ONTO THE MOTORCYCLES CAN BREAK, CAUSING THE FENDER AND BUMPER TO LOOSEN AND POSSIBLY CONTACT THE FRONT TIRE.
-
HARLEY-DAVIDSON FLSTN 1987
THE SCREWS ISSUED IN A KIT TO MOUNT THE FENDER AND AN ACCESSORY FRONT BUMPER ONTO THE MOTORCYCLES CAN BREAK, CAUSING THE FENDER AND BUMPER TO LOOSEN AND POSSIBLY CONTACT THE FRONT TIRE.
-
HARLEY-DAVIDSON FLSTN 1986
THE SCREWS ISSUED IN A KIT TO MOUNT THE FENDER AND AN ACCESSORY FRONT BUMPER ONTO THE MOTORCYCLES CAN BREAK, CAUSING THE FENDER AND BUMPER TO LOOSEN AND POSSIBLY CONTACT THE FRONT TIRE.