INTERNATIONAL 3800
-
INTERNATIONAL 3800 2003
ON CERTAIN SCHOOL BUSES AND TRUCK MODEL VEHICLES MANUFACTURED BETWEEN FEBRUARY 28, 1999, THROUGH APRIL 5, 2004, THE ANTI-LOCK BRAKE SYSTEM ELECTRONIC CONTROL UNIT (ECU) MAY MISINTERPRET A CORRUPT WHEEL SPEED SIGNAL.
-
INTERNATIONAL 3800 2002
ON CERTAIN SCHOOL BUSES AND TRUCK MODEL VEHICLES MANUFACTURED BETWEEN FEBRUARY 28, 1999, THROUGH APRIL 5, 2004, THE ANTI-LOCK BRAKE SYSTEM ELECTRONIC CONTROL UNIT (ECU) MAY MISINTERPRET A CORRUPT WHEEL SPEED SIGNAL.
-
INTERNATIONAL 3800 2004
ON CERTAIN SCHOOL BUSES AND TRUCK MODEL VEHICLES MANUFACTURED BETWEEN FEBRUARY 28, 1999, THROUGH APRIL 5, 2004, THE ANTI-LOCK BRAKE SYSTEM ELECTRONIC CONTROL UNIT (ECU) MAY MISINTERPRET A CORRUPT WHEEL SPEED SIGNAL.
-
INTERNATIONAL 3800 2003
ON CERTAIN SCHOOL AND TRANSIT BUSES THE STUDS USED TO SECURE THE POWER STEERING PUMP TO THE ENGINE BLOCK CAN FAIL, RESULTING IN ENGINE OIL LEAKAGE AND COMPLETE LOSS OF POWER STEERING. THE POWER STEERING PUMP IS DESIGNED TO PROVIDE POWER ASSIST TO BOTH THE STEERING SYSTEM AND THE HYDRAULIC BRAKING SYSTEM. SHOULD STUD FAILURE CAUSE THE PUMP TO BECOME DISENGAGED FROM ITS DRIVE GEARS, A REDUCTION OF THE FLUID FLOW RATE TO THE BRAKE SYSTEM COULD OCCUR AND POSSIBLY CAUSE AN EXTENDED STOPPING DISTANCE AS WELL AS INCREASED STEERING WHEEL EFFORTS.
-
INTERNATIONAL 3800 2004
ON CERTAIN SCHOOL AND TRANSIT BUSES THE STUDS USED TO SECURE THE POWER STEERING PUMP TO THE ENGINE BLOCK CAN FAIL, RESULTING IN ENGINE OIL LEAKAGE AND COMPLETE LOSS OF POWER STEERING. THE POWER STEERING PUMP IS DESIGNED TO PROVIDE POWER ASSIST TO BOTH THE STEERING SYSTEM AND THE HYDRAULIC BRAKING SYSTEM. SHOULD STUD FAILURE CAUSE THE PUMP TO BECOME DISENGAGED FROM ITS DRIVE GEARS, A REDUCTION OF THE FLUID FLOW RATE TO THE BRAKE SYSTEM COULD OCCUR AND POSSIBLY CAUSE AN EXTENDED STOPPING DISTANCE AS WELL AS INCREASED STEERING WHEEL EFFORTS.
-
INTERNATIONAL 3800 2003
ON CERTAIN SCHOOL AND TRANSIT BUSES BUILT WITH BOSCH ZERO OFFSET PIN SLIDE (ZOPS) HYDRAULIC DISC BRAKES, THE ZOPS HYDRAULIC DISC BRAKES MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION, WHICH CAN RESULT IN EXCESSIVE OR ABNORMAL HEAT GENERATION AT ONE OR MORE OF THE BRAKES.
-
INTERNATIONAL 3800 2002
ON CERTAIN SCHOOL AND TRANSIT BUSES BUILT WITH BOSCH ZERO OFFSET PIN SLIDE (ZOPS) HYDRAULIC DISC BRAKES, THE ZOPS HYDRAULIC DISC BRAKES MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION, WHICH CAN RESULT IN EXCESSIVE OR ABNORMAL HEAT GENERATION AT ONE OR MORE OF THE BRAKES.
-
INTERNATIONAL 3800 1990
THESE BUSES HAVE A TURN SIGNAL LEVER THAT WILL NOT OPERATE CONSISTENTLY IN THE LANE CHANGE MODE IF THE LEVER IS NOT MOVED TO THE POSITION WHERE RESISTANCE TO MOVEMENT IS FELT.
-
INTERNATIONAL 3800 1990
THE WIRE END OF THE HAND THROTTLE CABLE PASSES THROUGH A SPLIT PLASTIC GROMMET IN THE ACCELERATOR ROD. THIS WIRE CAN WORK THROUGH THE SLOT IN THE GROMMET AND BECOME LODGED BETWEEN THE GROMMET AND THE EDGE OF THE HOLE IN THE ACCELERATOR ROD.
-
INTERNATIONAL 3800 1990
THE FUEL SYSTEM FAILED THE CRASH BARRIER TEST.
-
INTERNATIONAL 3800 1990
THE THROTTLE VALVE INSIDE THE HYDRAULIC BRAKE BOOSTER MAY DEFORM FROM BUILDUP OF HEAT AND PRESSURE AND CLOSE-OFF FLUID RETURN PORTS.