vin-number

KENWORTH T270

KENWORTH T270 2019

PACCAR Incorporated (PACCAR) is recalling certain 2019 Kenworth T270 and T370 vehicles. The rear hub axle nut on these vehicles may have been over tightened, possibly causing bearing failure or a fire.
KENWORTH T270 2018

PACCAR Incorporated (PACCAR) is recalling certain 2018 Kenworth T270 trucks. The outer spindle nut of the front wheel hub assembly may have been incorrectly installed possibly causing bearing failure.
KENWORTH T270 2018

PACCAR Incorporated (PACCAR) is recalling certain 2018 Kenworth T270 trucks. The outer spindle nut of the front wheel hub assembly may have been incorrectly installed possibly causing bearing failure.
KENWORTH T270 2016

PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
KENWORTH T270 2016

PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
KENWORTH T270 2017

PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Kenworth K370, T270, T370, T440, T660, T800 trucks manufactured February 2, 2016, to October 13, 2016, and Peterbilt 330, 337, 348, 367, 389, 567, and 579 trucks manufactured March 7, 2016, to October 5, 2016. The affected vehicles are equipped with certain Goodyear LHS Load Range G tires, size 295/75R22.5 G399A, that due to incomplete adhesion, have a tire tread that may partially separate.
KENWORTH T270 2016

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
KENWORTH T270 2015

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
KENWORTH T270 2014

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
KENWORTH T270 2013

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
KENWORTH T270 2012

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
KENWORTH T270 2011

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
KENWORTH T270 2015

PACCAR Incorporated (PACCAR) is recalling certain model year 2015 Peterbilt 367, 389, 567, 579, and 587 trucks manufactured from May 23, 2014, to February 13, 2015, and 2015 Kenworth T270, T370, T440, T470, T660, T680, T800, T880, and W900 trucks manufactured from May 23, 2014, to February 13, 2015, equipped with certain air brake actuators. The affected vehicles may experience brake drag due to an improperly seated diaphragm in the brake chamber.
KENWORTH T270 2015

PACCAR Incorporated (PACCAR) is recalling certain model year 2015 Kenworth K270, T270, K370, T370, T440, T470, and W900 chassis manufactured May 13, 2014, to July 23, 2014, and certain model year 2015 Peterbilt 210, 220, 320, 325, 330, 337, 348, 365, 382, 384, and 567 chassis manufactured May 8, 2014, to July 22, 2014. The Cummins ISB or ISL engines in these vehicles may have been equipped with Fleetguard UFF-XT fuel filters, part number FF63009, whose filter shell may separate from the fuel filter nut plate causing the engine to stall without warning.
KENWORTH T270 2014

PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between August 7, 2013, and November 3, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, Seat Belt Assemblies.
KENWORTH T270 2014

PACCAR Incorporated (Paccar) is recalling certain model year 2014 Kenworth T170, T270, T370, T440, T470, T660, T680, T700, T800, T880, C500 and W900 trucks manufactured July 1, 2013 through September 17, 2013. In the affected vehicles, the plastic housing of the Stop/Tail/Turn (STT) lamp can shrink and allow the light bulb to fall out of the mounted retention ring. As such, the Stop/Tail/Turn light would not be illuminated, and the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108 Lamps, Reflective Devices, and Associated Equipment.
KENWORTH T270 2014

PACCAR is recalling certain model year 2014 Kenworth T170, T270, T370, T470, T660, T680, T800, T880, and W900 trucks manufactured May 6, 2013, through May 17, 2013; and model year 2014 Peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389K, 567, 579 and 587 trucks manufactured May 1, 2013 through May 17, 2013. An internal defect in the ignition switch causes the starter to engage when a key is partially inserted, before the key is turned.
KENWORTH T270 2014

PACCAR is recalling certain model year 2014 Kenworth T270 and T370 trucks, manufactured from January 31, 2013, through February 4, 2013. The left hand seat belt floor pan reinforcement bracket was not positioned correctly during assembly. This could result in the failure of the seat belt anchor mounting.
KENWORTH T270 2013

Kenworth is recalling certain model year 2012 and 2013 T270 and T370 medium duty trucks built with Eaton Ultrashift transmissions between December 7, 2011, and April 6, 2012. The air harness from the treadle valve on the affected vehicles was routed in a manner that can cause the air brake lines to be pinched between the cab and the electronic clutch actuator of the Eaton Ultrashift transmission. Significant movement between the cab and transmission can cause progressive wear and an eventual leak in the air lines.
KENWORTH T270 2012

Kenworth is recalling certain model year 2012 and 2013 T270 and T370 medium duty trucks built with Eaton Ultrashift transmissions between December 7, 2011, and April 6, 2012. The air harness from the treadle valve on the affected vehicles was routed in a manner that can cause the air brake lines to be pinched between the cab and the electronic clutch actuator of the Eaton Ultrashift transmission. Significant movement between the cab and transmission can cause progressive wear and an eventual leak in the air lines.
KENWORTH T270 2013

Geo. Heiser Body Company, Inc., (Geo. Heiser Body Company) is recalling certain model year 2006 International and 2010-2013 Fuso, Hino, International, Kenworth, and Peterbilt vehicles equipped with Sure Power battery separator devices. These devices may overheat.
KENWORTH T270 2013

PACCAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 KENWORTH T170, T270, T370, T440, T470, T660, T700, T800, W900, AND PETERBILT 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, AND 587 VEHICLES, MANUFACTURED FROM JANUARY 31, 2011, THROUGH JANUARY 19, 2012, AND EQUIPPED WITH BENDIX ATR-6 ANTILOCK TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.
KENWORTH T270 2012

PACCAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 KENWORTH T170, T270, T370, T440, T470, T660, T700, T800, W900, AND PETERBILT 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, AND 587 VEHICLES, MANUFACTURED FROM JANUARY 31, 2011, THROUGH JANUARY 19, 2012, AND EQUIPPED WITH BENDIX ATR-6 ANTILOCK TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.
KENWORTH T270 2011

PACCAR IS RECALLING CERTAIN MODEL YEAR 2011-2012 KENWORTH T270/370, T440/T470, T800, T660, W900 AND C500 VEHICLES MANUFACTURED BETWEEN OCTOBER 18, 2010, AND JANUARY 28, 2011. CERTAIN CAST IRON SLACK ADJUSTER HOUSINGS, WHICH TRANSMIT BRAKING FORCE FROM THE BRAKE CHAMBER PUSH ROD TO THE BRAKE CAM TUBE, MAY INCLUDE A FLOW NOTCH IN THE HANDLE PORTION OF THE HOUSING DUE TO AN ERROR DURING THE CASTING PROCESS. A FLOW NOTCH IN THE HANDLE PORTION MAY REDUCE THE EFFECTIVE CROSS SECTION STRUCTURE AND CAUSE THE SLACK ADJUSTER HOUSING TO FRACTURE.
KENWORTH T270 2011

KENWORTH IS RECALLING CERTAIN MODEL YEAR 2011 T270, T370, AND T800 TRUCKS MANUFACTURED FROM JANUARY 28 THROUGH MARCH 19, 2010, EQUIPPED WITH DV-2 AIR GOVERNOR CONTAINING PART NUMBER G90-1070-2111111 ON THE T270/370 MODEL TRUCKS AND PART NUMBER G90-1070-11113111 ON THE T800 MODEL TRUCKS. THE DV-2 AIR GOVERNOR WAS MISASSEMBLED WITH A BLANK PLUG INSTEAD OF A BREATHER. WITHOUT THE BREATHER INSTALLED, THE AIR GOVERNOR MAY NOT BE ABLE TO DETECT THE LOSS OF AIR PRESSURE IN THE AIR SYSTEM DURING NORMAL USE. THIS CONDITION MAY RESULT IN THE SLOW ACTIVATION OF THE EMERGENCY SPRING BRAKES.
KENWORTH T270 2010

KENWORTH IS RECALLING CERTAIN MODEL YEAR 2010 T270 AND T370 TRUCKS EQUIPPED WITH NON-LMS HUBS. THE SPINDLE NUT ATTACHING THE HUB AND BEARING TO THE AXLE SPINDLE (STEER OR DRIVE) MAY HAVE BEEN OVER-TORQUED DURING THE HUB INSTALLATION PROCESS.
KENWORTH T270 2009

PACCAR IS RECALLING MODEL YEAR 2008-2010 KENWORTH T300, T270, AND T370, MODEL YEAR 2009-2010 T800 AND PETERBILT MODEL YEAR 2008-2010 335, 340, AND 367 VEHICLES BUILT ON CUMMINS' DIESEL ENGINE. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
KENWORTH T270 2010

PACCAR IS RECALLING MODEL YEAR 2008-2010 KENWORTH T300, T270, AND T370, MODEL YEAR 2009-2010 T800 AND PETERBILT MODEL YEAR 2008-2010 335, 340, AND 367 VEHICLES BUILT ON CUMMINS' DIESEL ENGINE. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
KENWORTH T270 2008

PACCAR IS RECALLING MODEL YEAR 2008-2010 KENWORTH T300, T270, AND T370, MODEL YEAR 2009-2010 T800 AND PETERBILT MODEL YEAR 2008-2010 335, 340, AND 367 VEHICLES BUILT ON CUMMINS' DIESEL ENGINE. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN INHIBIT MODE WHEN IT IS NOT.
KENWORTH T270 2009

PACCAR IS RECALLING 2 MY 2009 KENWORTH T270 AND T370 4X2 TRUCKS. THE ANCHOR PLATE TIE BAR WHICH REINFORCES THE ANCHOR PLATE ON 73MM CALIPERS WAS NOT INSTALLED. UNDER HIGH TORQUE BRAKE APPLICATIONS THE SLIDE PINS COULD BIND, RESULTING IN A REDUCTION OF THE BRAKING EFFORT AND/OR BRAKE DRAG CAUSED BY INCOMPLETE BRAKE RELEASE; OR THE ANCHOR PLATE COULD FATIGUE, RESULTING IN A CRACKED AND/OR FRACTURE ANCHOR PLATE.