vin-number

NISSAN QUEST

NISSAN QUEST 2011

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN QUEST VEHICLES, MANUFACTURED FROM JULY 29, 2010, THROUGH FEBRUARY 21, 2012. DUE TO SOFTWARE PROGRAMMING, WHILE DRIVING AT SLOW SPEEDS OR IDLING ON A DECLINE WITH ? TANK FUEL OR LESS, THERE MAY BE AN INSUFFICIENT SUPPLY OF FUEL TO THE ENGINE. AS A RESULT, THE ENGINE MAY STALL.
NISSAN QUEST 2011

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN QUEST VEHICLES, MANUFACTURED FROM JULY 29, 2010, THROUGH FEBRUARY 21, 2012. DUE TO SOFTWARE PROGRAMMING, WHILE DRIVING AT SLOW SPEEDS OR IDLING ON A DECLINE WITH ? TANK FUEL OR LESS, THERE MAY BE AN INSUFFICIENT SUPPLY OF FUEL TO THE ENGINE. AS A RESULT, THE ENGINE MAY STALL.
NISSAN QUEST 2012

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN QUEST VEHICLES, MANUFACTURED FROM JULY 29, 2010, THROUGH FEBRUARY 21, 2012. DUE TO SOFTWARE PROGRAMMING, WHILE DRIVING AT SLOW SPEEDS OR IDLING ON A DECLINE WITH ? TANK FUEL OR LESS, THERE MAY BE AN INSUFFICIENT SUPPLY OF FUEL TO THE ENGINE. AS A RESULT, THE ENGINE MAY STALL.
NISSAN QUEST 2012

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN QUEST VEHICLES, MANUFACTURED FROM JULY 29, 2010, THROUGH FEBRUARY 21, 2012. DUE TO SOFTWARE PROGRAMMING, WHILE DRIVING AT SLOW SPEEDS OR IDLING ON A DECLINE WITH ? TANK FUEL OR LESS, THERE MAY BE AN INSUFFICIENT SUPPLY OF FUEL TO THE ENGINE. AS A RESULT, THE ENGINE MAY STALL.
NISSAN QUEST 2009

NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.
NISSAN QUEST 2008

NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.
NISSAN QUEST 2008

NISSAN IS RECALLING 1,126 MY 2008 QUEST, TITAN AND ARMADA VEHICLES EQUIPPED WITH MANUAL ADJUSTMENT FRONT SEATS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, SEATING SYSTEMS. THE SEAT TRACK ASSEMBLY MAY HAVE BEEN MANUFACTURED OUT OF SPECIFICATION.
NISSAN QUEST 2007

DURING PRODUCTION, A SELECT NUMBER OF VEHICLES UNDERWENT AN OFFLINE INSPECTION AT THE ASSEMBLY PLANT WHERE A BOLT IN THE FRONT SUSPENSION ASSEMBLY WAS REMOVED. ON SOME OF THESE VEHICLES, IT IS POSSIBLE THAT THIS BOLT MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATION WHEN IT WAS REINSTALLED.
NISSAN QUEST 2004

ON CERTAIN MINI VANS EQUIPPED WITH A FOLDING THIRD ROW REAR SEAT, WHEN THE THIRD ROW SEAT IS RAISED FROM ITS STOWED POSITION, IT ENGAGES STRIKER BRACKETS, ONE ON EACH SIDE OF THE SEAT CUSHION. THE FOLD-AWAY STRIKER LOOP IS WELDED TO A MOUNTING BRACKET. THE STRIKER MAY BECOME DETACHED FROM ITS MOUNTING BRACKET DUE TO A BROKEN WELD AT THE POINT OF ATTACHMENT TO THE BRACKET.
NISSAN QUEST 2005

ON CERTAIN MINI VANS EQUIPPED WITH A FOLDING THIRD ROW REAR SEAT, WHEN THE THIRD ROW SEAT IS RAISED FROM ITS STOWED POSITION, IT ENGAGES STRIKER BRACKETS, ONE ON EACH SIDE OF THE SEAT CUSHION. THE FOLD-AWAY STRIKER LOOP IS WELDED TO A MOUNTING BRACKET. THE STRIKER MAY BECOME DETACHED FROM ITS MOUNTING BRACKET DUE TO A BROKEN WELD AT THE POINT OF ATTACHMENT TO THE BRACKET.
NISSAN QUEST 2006

ON CERTAIN MINI VANS, THERE IS A SEAT ADJUSTMENT MECHANISM THAT CONTAINS EXPOSED MOVING COMPONENTS LOCATED AT THE REAR INSIDE EDGE OF THE SECOND ROW SEAT.
NISSAN QUEST 2004

ON CERTAIN MINI VANS, THERE IS A SEAT ADJUSTMENT MECHANISM THAT CONTAINS EXPOSED MOVING COMPONENTS LOCATED AT THE REAR INSIDE EDGE OF THE SECOND ROW SEAT.
NISSAN QUEST 2005

ON CERTAIN MINI VANS, THERE IS A SEAT ADJUSTMENT MECHANISM THAT CONTAINS EXPOSED MOVING COMPONENTS LOCATED AT THE REAR INSIDE EDGE OF THE SECOND ROW SEAT.
NISSAN QUEST 2004

ON CERTAIN MINIVANS EQUIPPED WITH A POWER SLIDING DOOR(S), AT AN AMBIENT TEMPERATURE BELOW APPROXIMATELY 40 DEGREES FAHRENHEIT, THE ACTUATOR FOR THE POWER SLIDING DOOR(S) MAY EXPERIENCE BINDING DUE TO AN OUT-OF-SPECIFICATION CONDITION. IN ORDER TO OPEN, CLOSE OR REVERSE A POWER SLIDING DOOR, THE SHIFT SELECTOR LEVER MUST BE IN PARK. IF THE ACTUATOR IS EXPERIENCING BINDING AND THE DRIVER SHIFTS THE VEHICLE OUT OF PARK WHILE A POWER SLIDING DOOR IS STILL CLOSING, THE DOOR LATCHES MAY NOT ENGAGE.
NISSAN QUEST 2004

CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE ADVANCED AIR BAG REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, OCCUPANT CRASH PROTECTION. THE AIR BAG FOR THE FRONT PASSENGER SEAT IS TO BE TURNED OFF (SO THAT IT DOES NOT INFLATE) WHEN CERTAIN OCCUPANTS, SUCH AS SMALL CHILDREN, ARE IN THE FRONT SEAT.
NISSAN QUEST 1994

VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
NISSAN QUEST 1998

VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
NISSAN QUEST 1997

VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
NISSAN QUEST 1996

VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
NISSAN QUEST 1995

VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
NISSAN QUEST 1993

VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
NISSAN QUEST 2001

VEHICLE DESCRIPTION: MINI VANS. THESE VEHICLES MAY HAVE THE PLASTIC TRIM COVER AROUND THE BASE OF THE FRONT SEAT SAFETY BELT BUCKLE TRAPPED BETWEEN THE SHOULDER OF THE RESTRAINT ANCHORAGE BOLT AND THE SEAT PEDESTAL. THIS COULD EVENTUALLY ALLOW THE SEAT BELT BUCKLE BOLT TO LOOSEN.
NISSAN QUEST 2000

VEHICLE DESCRIPTION: MINI VANS. ONE OR MORE OF THE FIVE BOLTS THAT MOUNT THE RACK AND PINION STEERING GEAR TO THE VEHICLE MAY HAVE BEEN INCORRECTLY TIGHTENED.
NISSAN QUEST 1999

VEHICLE DESCRIPTION: MINI VANS. ONE OR MORE OF THE FIVE BOLTS THAT MOUNT THE RACK AND PINION STEERING GEAR TO THE VEHICLE MAY HAVE BEEN INCORRECTLY TIGHTENED.
NISSAN QUEST 2000

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, SEAT BELT ASSEMBLIES.
NISSAN QUEST 1999

VEHICLE DESCRIPTION: MINIVANS AND LIGHT DUTY TRUCKS. THE TAIL LIGHT SOCKET MAY HAVE BEEN IMPROPERLY MOLDED, RESULTING IN THE LOCKING TAB HAVING INSUFFICIENT FORCE TO RETAIN THE BULB.
NISSAN QUEST 1999

VEHICLE DESCRIPTION: MINI VANS. THE FUEL TANK RETENTION STRAP (TWO STRAPS PER VEHICLE) CAN BREAK AT THE SPOT WELDS CAUSING AN UNDERBODY RATTLE.
NISSAN QUEST 1999

VEHICLE DESCRIPTION: MINI VANS EQUIPPED WITH E-Z ENTRY SEATS. THE AFFECTED VEHICLES MAY HAVE A SECOND ROW RIGHT HAND SIDE CAPTAIN CHAIR THAT HAS INADEQUATE LUBRICATION OF THE EASY ENTRY AND EXIT LATCH SYSTEM. IN SOME CASES, THE ACTUATOR SPRING IN THE LATCH COULD DEFORM AFTER REPEATED USE, CAUSING THE LATCH TO REMAIN IN THE UNLATCHED POSITION. IF THIS OCCURS, THE SEAT WILL SLIDE FREELY ON THE SEAT TRACK AND THE SPRINGS ON THE TRACK WILL MOVE THE SEAT TO THE EASY ENTRY POSITION TOWARD THE FRONT OF THE VEHICLE.
NISSAN QUEST 1994

THE REAR LAMP SOCKET MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING.
NISSAN QUEST 1995

THE REAR LAMP SOCKET MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING.