WELD-IT TRAILER
-
WELD-IT TRAILER 2001
ON CERTAIN FULL TRAILERS (TANKERS) EQUIPPED WITH TUTHILL TRAILER SUSPENSIONS, MODELS 20/22AR. THE BEAM/AXLE PIVOT CONNECTION JOINT IS MIS-ALIGNED CAUSING EXCESSIVE PLAY WITH THE TRAILER ALLOWING THE TRAILER TO WANDER.
-
WELD-IT TRAILER 1998
ON CERTAIN FULL TRAILERS (TANKERS) EQUIPPED WITH TUTHILL TRAILER SUSPENSIONS, MODELS 20/22AR. THE BEAM/AXLE PIVOT CONNECTION JOINT IS MIS-ALIGNED CAUSING EXCESSIVE PLAY WITH THE TRAILER ALLOWING THE TRAILER TO WANDER.
-
WELD-IT TRAILER 1997
ON CERTAIN FULL TRAILERS (TANKERS) EQUIPPED WITH TUTHILL TRAILER SUSPENSIONS, MODELS 20/22AR. THE BEAM/AXLE PIVOT CONNECTION JOINT IS MIS-ALIGNED CAUSING EXCESSIVE PLAY WITH THE TRAILER ALLOWING THE TRAILER TO WANDER.
-
WELD-IT TRAILER 1996
ON CERTAIN FULL TRAILERS (TANKERS) EQUIPPED WITH TUTHILL TRAILER SUSPENSIONS, MODELS 20/22AR. THE BEAM/AXLE PIVOT CONNECTION JOINT IS MIS-ALIGNED CAUSING EXCESSIVE PLAY WITH THE TRAILER ALLOWING THE TRAILER TO WANDER.
-
WELD-IT TRAILER 2000
ON CERTAIN FULL TRAILERS (TANKERS) EQUIPPED WITH TUTHILL TRAILER SUSPENSIONS, MODELS 20/22AR. THE BEAM/AXLE PIVOT CONNECTION JOINT IS MIS-ALIGNED CAUSING EXCESSIVE PLAY WITH THE TRAILER ALLOWING THE TRAILER TO WANDER.
-
WELD-IT TRAILER 1999
ON CERTAIN FULL TRAILERS (TANKERS) EQUIPPED WITH TUTHILL TRAILER SUSPENSIONS, MODELS 20/22AR. THE BEAM/AXLE PIVOT CONNECTION JOINT IS MIS-ALIGNED CAUSING EXCESSIVE PLAY WITH THE TRAILER ALLOWING THE TRAILER TO WANDER.
-
WELD-IT TRAILER 1995
ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
WELD-IT TRAILER 1994
ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
WELD-IT TRAILER 1998
ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
WELD-IT TRAILER 1997
ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
WELD-IT TRAILER 1996
ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
WELD-IT TRAILER 2000
ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
-
WELD-IT TRAILER 1999
ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.