vin-number

VACTOR

VACTOR RAMJET 2013

Vactor Manufacturing is recalling certain model year 2012-2013 Ramjet vehicles equipped with Allison Transmissions. Due to an incorrect transmission software parameter, the vehicle may go into drive mode while in PTO is being used.
VACTOR GUZZLER 2012

Vactor Manufacturing (Vactor) is recalling certain model year 2012-2013 HXX and Guzzler vacuum trucks equipped with an Alkota water heater. These trucks were not equipped with an oil primary control. If the burner for the water heater fails to ignite normally, fuel can accumulate in the water heater combustion chamber.
VACTOR GUZZLER 2013

Vactor Manufacturing (Vactor) is recalling certain model year 2012-2013 HXX and Guzzler vacuum trucks equipped with an Alkota water heater. These trucks were not equipped with an oil primary control. If the burner for the water heater fails to ignite normally, fuel can accumulate in the water heater combustion chamber.
VACTOR HXX 2013

Vactor Manufacturing (Vactor) is recalling certain model year 2012-2013 HXX and Guzzler vacuum trucks equipped with an Alkota water heater. These trucks were not equipped with an oil primary control. If the burner for the water heater fails to ignite normally, fuel can accumulate in the water heater combustion chamber.
VACTOR HXX 2012

Vactor Manufacturing (Vactor) is recalling certain model year 2012-2013 HXX and Guzzler vacuum trucks equipped with an Alkota water heater. These trucks were not equipped with an oil primary control. If the burner for the water heater fails to ignite normally, fuel can accumulate in the water heater combustion chamber.
VACTOR JETTER-F 2010

VACTOR IS RECALLING CERTAIN MODEL YEAR 2010-2011 JETTER-F AND JETTER-V SEWER CLEANERS MANUFACTURED FROM FEBRUARY 2010, THROUGH APRIL 2011. ONE OF THE SAFETY INTERLOCKS THAT ARE BUILT INTO THE UNITS TO PROTECT THE OPERATORS AND ASSURE NO VEHICLE MOVEMENTS CAN HAPPEN DURING SEWER CLEANING OPERATIONS WERE INCORRECTLY WIRED.
VACTOR JETTER-V 2010

VACTOR IS RECALLING CERTAIN MODEL YEAR 2010-2011 JETTER-F AND JETTER-V SEWER CLEANERS MANUFACTURED FROM FEBRUARY 2010, THROUGH APRIL 2011. ONE OF THE SAFETY INTERLOCKS THAT ARE BUILT INTO THE UNITS TO PROTECT THE OPERATORS AND ASSURE NO VEHICLE MOVEMENTS CAN HAPPEN DURING SEWER CLEANING OPERATIONS WERE INCORRECTLY WIRED.
VACTOR JETTER-V 2011

VACTOR IS RECALLING CERTAIN MODEL YEAR 2010-2011 JETTER-F AND JETTER-V SEWER CLEANERS MANUFACTURED FROM FEBRUARY 2010, THROUGH APRIL 2011. ONE OF THE SAFETY INTERLOCKS THAT ARE BUILT INTO THE UNITS TO PROTECT THE OPERATORS AND ASSURE NO VEHICLE MOVEMENTS CAN HAPPEN DURING SEWER CLEANING OPERATIONS WERE INCORRECTLY WIRED.
VACTOR JETTER-F 2011

VACTOR IS RECALLING CERTAIN MODEL YEAR 2010-2011 JETTER-F AND JETTER-V SEWER CLEANERS MANUFACTURED FROM FEBRUARY 2010, THROUGH APRIL 2011. ONE OF THE SAFETY INTERLOCKS THAT ARE BUILT INTO THE UNITS TO PROTECT THE OPERATORS AND ASSURE NO VEHICLE MOVEMENTS CAN HAPPEN DURING SEWER CLEANING OPERATIONS WERE INCORRECTLY WIRED.
VACTOR 2103 2010

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2009

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2008

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2007

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2006

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2005

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2004

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2003

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2002

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2001

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 2000

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1999

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1998

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1997

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1996

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1995

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1994

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1993

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2103 1992

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
VACTOR 2100 2009

VACTOR IS RECALLING CERTAIN MODEL YEAR 2004, 2007, AND 2009 VACTOR 2100 AND 2009 VACTOR JETTER SEWER CLEANERS, MANUFACTURED BETWEEN APRIL 1 AND SEPTEMBER 25, 2009. THESE VEHICLES WERE EITHER SUPPLIED WITH OR REFITTED WITH DEFECTIVE HOSE FITTINGS. UNDER HEAVY OPERATING CONDITIONS, THESE FITTINGS COULD FAIL.
VACTOR 2100 2007

VACTOR IS RECALLING CERTAIN MODEL YEAR 2004, 2007, AND 2009 VACTOR 2100 AND 2009 VACTOR JETTER SEWER CLEANERS, MANUFACTURED BETWEEN APRIL 1 AND SEPTEMBER 25, 2009. THESE VEHICLES WERE EITHER SUPPLIED WITH OR REFITTED WITH DEFECTIVE HOSE FITTINGS. UNDER HEAVY OPERATING CONDITIONS, THESE FITTINGS COULD FAIL.