Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Dominator I Crane bodies sold for installation onto other chassis. These cranes have incorrect stabilizer arm locking pins that may not engage properly allowing the stabilizer arm to extend from the side of the vehicle while traveling.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain 2016-2017 Dominator Contractor series trucks built on 2017 Ford Super Duty chassis. These vehicles are equipped with a front jump start plug kit installed under the hood at the chassis battery. The fuse block for this kit may contact the hood creating an electrical short.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain 2016-2017 Dominator Contractor series trucks built on 2017 Ford Super Duty chassis. These vehicles are equipped with a front jump start plug kit installed under the hood at the chassis battery. The fuse block for this kit may contact the hood creating an electrical short.
Iowa Mold Tooling Co., Inc. (IMT) is recalling one model year 2013 Refuse-Container Delivery vehicle, equipped with a compressed natural gas (CNG) fuel system by Agility Fuel Systems. The affected CNG system has flexible stainless steel, sleeved, high pressure hoses that may corrode from exposure to environmental conditions such as water mixed with road salt.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016. The affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016. The affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, which have a valve bank cover that may crack and fall from the crane while the vehicle is being driven.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016. The affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, which have a valve bank cover that may crack and fall from the crane while the vehicle is being driven.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016. The affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, which have a valve bank cover that may crack and fall from the crane while the vehicle is being driven.
Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016. The affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, which have a valve bank cover that may crack and fall from the crane while the vehicle is being driven.
CERTAIN IMT AXLES WITH F24 SPINDLES MANUFACTURED BETWEEN FEBRUARY AND NOVEMBER 2005 AND INSTALLED AS ORIGINAL EQUIPMENT ON TRAILERS. DUE TO IMPROPER MATERIAL USED ON THE AXLE SPINDLE THE SPINDLE CAN BEND OR BREAK CAUSING THE WHEEL END TO COME LOOSE.
EQUIPMENT DESCRIPTION: 15 BRAKE SPIDERS THAT ARE PART OF THE REAR BRAKING SYSTEM ON CERTAIN HIGHWAY TRAILERS AND IS ALSO USED ON AXLES WITH 19.5 TIRES. THESE BRAKE SPIDERS CAN FRACTURE OR CRACK AS A RESULT OF FATIGUE STRESS.