vin-number

Enter Your VIN:

Advertisement

MERITOR

  • MERITOR WHEEL STUD 0

    Meritor, Inc. (Meritor) is recalling certain Wheel Studs, part number 09001988, installed in steer axle hubs. The wheel studs may have not been properly heat treated causing them to fail.

  • MERITOR EX225L2 BRAKES 0

    Meritor, Inc. (Meritor) is recalling certain trailer axles and MPA/MTA suspensions equipped with Meritor EX225 brakes. The brake caliper bolts on these axles may not be properly torqued which can allow the caliper to detach from the mounting flange. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, Air Brake System.

  • MERITOR EX225L2 BRAKES 0

    Meritor, Inc. (Meritor) is recalling certain trailer axles and MPA/MTA suspensions equipped with Meritor EX225 brakes. The brake caliper bolts on these axles may not be properly torqued which can allow the caliper to detach from the mounting flange. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, Air Brake System.

  • MERITOR FRONT DRIVE STEER AXLE 0

    Meritor, Inc. (Meritor) is recalling certain MX810 Series front drive steer axles, part numbers MX23810DANC7-538 and MX23810DANC8-538, manufactured May 27, 2016, to August 16, 2016 and equipped with MX25K lower king-pins. These lower king-pins may not meet design specifications and, as a result, may fracture, possibly causing a wheel end separation.

  • MERITOR AXLE 0

    Meritor Inc. (Meritor) is recalling certain 71000 Series Drum Axles, 71000 Series Disc Brake Axles, and 79000 Series Disc Brake Axles manufactured April 22, 2016, to September 9, 2016. The affected axles may have insufficient grease at the wheel ends, possibly resulting in bearing failure.

  • MERITOR FRONT NON DRIVE STEER AXL 0

    Meritor, Inc. (Meritor) is recalling certain FF967 Non-Drive Front Steer axles, part number 3100H7860, manufactured March 24, 2012, to April 11, 2012. The affected front axles may have been incorrectly heat treated.

  • MERITOR TRAILER AXLE ASSEMBLY 0

    Meritor, Inc. (Meritor) is recalling certain Trailer Axle Assemblies, part number HTQ4671LH8846. The affected axle assemblies are equipped with certain Haldex Life Seal Type 30/30 Long Stroke Air Brake Actuators. These axles may experience brake drag due to an improperly seated diaphragm in the brake chamber.

  • MERITOR EX225L+ AXLE ASSEMBLY 0

    Meritor, Inc. (Meritor) is recalling certain Meritor EX225L2, EX225L+, and Bendix ADB22X axles manufactured December 9, 2013, to August 25, 2015. The affected axle assemblies have caliper bolts that may not have been properly tightened, allowing the caliper mounting bolts to back out and the caliper to detach from the axle flange.

  • MERITOR EX225L2 BRAKES 0

    Meritor, Inc. (Meritor) is recalling certain Meritor EX225L2, EX225L+, and Bendix ADB22X axles manufactured December 9, 2013, to August 25, 2015. The affected axle assemblies have caliper bolts that may not have been properly tightened, allowing the caliper mounting bolts to back out and the caliper to detach from the axle flange.

  • MERITOR MT-40-14X REAR DRIVETRAIN 0

    Meritor, Inc. (Meritor) is recalling certain MT-40-14X Rear Drive Train axles manufactured November 11, 2014, to December 18, 2014. Due to an incorrect carrier and housing combination, the axles may have low lubricant levels that can cause the axle sump to inadequately circulate lubricant to the wheel end hub assembly.

  • MERITOR FRONT NON DRIVE STEER AXL 0

    Meritor, Inc. (Meritor) is recalling certain Front Non-Drive Axles, model numbers FH941, FH945, and MFS12155 manufactured July 25, 2014, to December 5, 2014. The affected axles have castellated nuts on the tie rod that may not be properly torqued.

  • MERITOR MFS NON-DRIVE STEER AXLE 0

    Meritor, Inc. (Meritor) is recalling certain MFS12143ANN model non-drive steer axles. Due to a manufacturing error, there may be weak spots in the beam of the affected axle assemblies.

  • MERITOR MFS NON-DRIVE STEER AXLE 0

    Meritor, Inc. (Meritor) is recalling certain MFS12143ANN model non-drive steer axles. Due to a manufacturing error, there may be weak spots in the beam of the affected axle assemblies.

  • MERITOR REMAN AXLES FOR TRAC INTE 0

    Meritor, Inc. is recalling certain RMT14512ABS and RMT14612 trailer axles that were remanufactured for Trac Intermodal between June 1, 2013 and June 30, 2013. During remanufacturing, the axles may have been assembled with the lock washer and pin misaligned.

  • MERITOR DRIVE AXLE 0

    Meritor, Inc. is recalling certain axle assemblies that were built with disc brakes using MGM J24 series air brake chambers. In the affected axles, the brake chambers may leak pressure allowing the parking brake to drag when it is supposed to be released. Brake dragging could lead to overheated brake components.

  • MERITOR TL SERIES 0

    MERITOR IS RECALLING CERTAIN TL SERIES TRAILER AXLES THAT CONTAIN THE FAG BRAND BEARING SYSTEM. THESE AXLES WERE SOLD AS AFTERMARKET REPLACEMENT EQUIPMENT AND INSTALLED AS ORIGINAL EQUIPMENT ON VARIOUS RECREATIONAL VEHICLES. THE BEARING SYSTEM HAS EXHIBITED LOW DURABILITY LIFE IN CERTAIN VEHICLE APPLICATIONS.

  • MERITOR REAR DRIVE AXLE 0

    MERITOR IS RECALLING CERTAIN REAR DRIVE AXLES AND FRONT NON DRIVE STEER AXLES PRODUCED FROM JULY 25, 2011, THROUGH SEPTEMBER 9, 2011, SOLD AND INSTALLED AS ORIGINAL EQUIPMENT TO HINO MOTORS MANUFACTURING. CERTAIN SUSPECT AXLES WITH WHEEL ENDS MAY HAVE IMPROPERLY ASSEMBLED FASTENING HARDWARE OR NUT LOCKING FEATURES.

  • MERITOR FRONT NON DRIVE STEER AXL 0

    MERITOR IS RECALLING CERTAIN REAR DRIVE AXLES AND FRONT NON DRIVE STEER AXLES PRODUCED FROM JULY 25, 2011, THROUGH SEPTEMBER 9, 2011, SOLD AND INSTALLED AS ORIGINAL EQUIPMENT TO HINO MOTORS MANUFACTURING. CERTAIN SUSPECT AXLES WITH WHEEL ENDS MAY HAVE IMPROPERLY ASSEMBLED FASTENING HARDWARE OR NUT LOCKING FEATURES.

  • MERITOR MFS-08 0

    MERITOR IS RECALLING CERTAIN MFS-08 SERIES NON-DRIVE FRONT AXLES SOLD AS ORIGINAL EQUIPMENT TO BE INSTALLED ON VARIOUS HEAVY TRUCKS. DURING THE ASSEMBLY PROCESS, THE STEERING ATTACHMENT BOLTS MAY HAVE BEEN INSUFFICIENTLY TORQUED.

  • MERITOR TL SERIES 0

    MERITOR IS RECALLING CERTAIN 16 MM C89-3121-2024 AND C61-3121-2025 HOUSINGS ASSEMBLED IN TO RD-23-164 DRIVE AXLES PRODUCED FROM DECEMBER 1, 2010, THROUGH FEBRUARY 14, 2011. THESE AXLES ARE INSTALLED AS ORIGINAL EQUIPMENT ON CERTAIN MACK AND DAIMLER TRUCKS VEHICLES. THE WELD THAT ATTACHES A BRACKET TO THE HOUSING MAY CRACK AS A RESULT OF IMPROPER WELDING PROCEDURES.

  • MERITOR MFS08113BNH14 0

    MERITOR IS RECALLING CERTAIN MERITOR MFS08113BNH12 AND MFS08113BNH14 SERIES AXLE ASSEMBLIES SOLD AND INSTALLED AS ORIGINAL EQUIPMENT FOR CERTAIN HEAVY TRUCKS. THE WHEEL BEARING CONE ROLLERS MAY NOT HAVE BEEN PROPERLY HEAT TREATED. THESE BEARING PRODUCTS CONTAIN A DATE CODE, ZJ.

  • MERITOR MFS08113BNH12 0

    MERITOR IS RECALLING CERTAIN MERITOR MFS08113BNH12 AND MFS08113BNH14 SERIES AXLE ASSEMBLIES SOLD AND INSTALLED AS ORIGINAL EQUIPMENT FOR CERTAIN HEAVY TRUCKS. THE WHEEL BEARING CONE ROLLERS MAY NOT HAVE BEEN PROPERLY HEAT TREATED. THESE BEARING PRODUCTS CONTAIN A DATE CODE, ZJ.

  • MERITOR TL SERIES 0

    MERITOR IS RECALLING CERTAIN TL SERIES TRAILER AXLES THAT CONTAIN THE FAG BRAND BEARING SYSTEM. THESE AXLES ARE SOLD AND INSTALLED AS ORIGINAL EQUIPMENT ON VARIOUS RECREATIONAL VEHICLES. THE BEARING SYSTEM HAS EXHIBITED LOW DURABILITY LIFE IN CERTAIN VEHICLE APPLICATIONS.

  • MERITOR TL SERIES 0

    MERITOR IS RECALLING CERTAIN TL SERIES TRAILER AXLES SOLD AS AFTERMARKET REPLACEMENT EQUIPMENT AND SOLD AND INSTALLED AS ORIGINAL EQUIPMENT IN VAN TRAILER APPLICATIONS. THE SPINDLE NUT MAY NOT HAVE BEEN PROPERLY TORQUED OR NOT TORQUED AT ALL ALLOWING EXCESSIVE END-PLAY IN THE WHEEL-END SYSTEM WHICH COULD PROGRESS TO A WHEEL SEPARATION.

  • MERITOR 18N 0

    MERITOR IS RECALLING CERTAIN DRIVELINE ASSEMBLIES, PART NUMBERS RPL25, 18N, AND 18MXL, SOLD AS AFTERMARKET EQUIPMENT FOR USE ON, OR INSTALLED AS ORIGINAL EQUIPMENT ON, VARIOUS HEAVY TRUCKS. THE TUBING USED TO ASSEMBLE THE AFFECTED DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL.

  • MERITOR RPL25 0

    MERITOR IS RECALLING CERTAIN DRIVELINE ASSEMBLIES, PART NUMBERS RPL25, 18N, AND 18MXL, SOLD AS AFTERMARKET EQUIPMENT FOR USE ON, OR INSTALLED AS ORIGINAL EQUIPMENT ON, VARIOUS HEAVY TRUCKS. THE TUBING USED TO ASSEMBLE THE AFFECTED DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL.

  • MERITOR 18MXL 0

    MERITOR IS RECALLING CERTAIN DRIVELINE ASSEMBLIES, PART NUMBERS RPL25, 18N, AND 18MXL, SOLD AS AFTERMARKET EQUIPMENT FOR USE ON, OR INSTALLED AS ORIGINAL EQUIPMENT ON, VARIOUS HEAVY TRUCKS. THE TUBING USED TO ASSEMBLE THE AFFECTED DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL.

  • MERITOR FH946U 0

    MERITOR BRAND FH946U AXLE ASSEMBLIES MANUFACTURED BETWEEN AUGUST 9, 1996, AND NOVEMBER 6, 2001, USED AS A FRONT STEERING AXLE ON LOW FLOOR BUSES BUILT BY NEW FLYER INDUSTRIES. THESE ASSEMBLIES WERE OMITTED FROM THE POST-HEAT TREATMENT MAGNAFLUX OPERATION WHICH COULD RESULT IN SURFACE CRACKING AND POSSIBLE FAILURE OF THE AXLE. THIS CAMPAIGN SUPERCEEDES ARVINMERITOR'S PREVIOUS RECALL, 02E-032, TO INCLUDE ADDITION AXLE ASSEMBLIES.

  • MERITOR BRAKE CAMSHAFT 0

    THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. EQUIPMENT DESCRIPTION: BRAKE CAMSHAFTS IN TRAILER AXLES. CERTAIN TRAILER AXLE ASSEMBLIES HAVE BEEN MANUFACTURED WITH INCORRECTLY INSTALLED BRAKE CAMSHAFTS.

  • MERITOR RC26720 0

    EQUIPMENT DESCRIPTION: REAR DRIVE AXLE ASSEMBLIES EQUIPPED WITH MERITOR 3213-S-1865 SPINDLES. THESE AXLES WERE ONLY SUPPLIED TO NOVA BUS. THE SPINDLES USED ON THESE AXLES MAY NOT HAVE THE INTENDED QUENCH AND TEMPER PROCESSING.

Search NHTSA Vehicle Recalls

MERITOR Models