BMW K100
-
BMW K100 1992
THE BONDING TECHNIQUE USED BETWEEN THE PAD AND THE BACKING PLATE CAN RESULT IN A POROUS JOINT LAYER WHICH WATER AND SALT CAN PENETRATE, RESULTING IN CORROSION OF THE BACKING PLATE.
-
BMW K100 1990
THE BONDING TECHNIQUE USED BETWEEN THE PAD AND THE BACKING PLATE CAN RESULT IN A POROUS JOINT LAYER WHICH WATER AND SALT CAN PENETRATE, RESULTING IN CORROSION OF THE BACKING PLATE.
-
BMW K100 1991
THE BONDING TECHNIQUE USED BETWEEN THE PAD AND THE BACKING PLATE CAN RESULT IN A POROUS JOINT LAYER WHICH WATER AND SALT CAN PENETRATE, RESULTING IN CORROSION OF THE BACKING PLATE.
-
BMW K100 1987
LOWER PART OF SPRING/DAMPER UNIT EYELET, WHICH ATTACHES TO THE REAR DRIVE UNIT, COULD CRACK.
-
BMW K100 1986
LOWER PART OF SPRING/DAMPER UNIT EYELET, WHICH ATTACHES TO THE REAR DRIVE UNIT, COULD CRACK.
-
BMW K100 1986
THROTTLE CABLE MAY HAVE BEEN DAMAGED DURING INSTALLATION RESULTING IN A BEND OR A KINK OR CHAFING AND FRAYING OF THE BRAIDED WIRE CABLE. CONSEQUENCE OF DEFECT: THROTTLE OPERATION COULD BE IMPAIRED REQUIRING INCREASED EFFORT TO OPEN AND CLOSE THE THROTTLE, RESULTING IN LOSS OF THROTTLE CONTROL WHICH MAY LEAD TO AN ACCIDENT.
-
BMW K100 1985
THROTTLE CABLE MAY HAVE BEEN DAMAGED DURING INSTALLATION RESULTING IN A BEND OR A KINK OR CHAFING AND FRAYING OF THE BRAIDED WIRE CABLE. CONSEQUENCE OF DEFECT: THROTTLE OPERATION COULD BE IMPAIRED REQUIRING INCREASED EFFORT TO OPEN AND CLOSE THE THROTTLE, RESULTING IN LOSS OF THROTTLE CONTROL WHICH MAY LEAD TO AN ACCIDENT.
-
BMW K100 1985
A GROUND FAULT MAY OCCUR IN THE STOPLIGHT SWITCH WHICH IS LOCATED ON THE RIGHT HANDLEBAR IN THE THROTTLE TWIST GRIP HOUSING. CONSEQUENCES OF DEFECT: THE CABLE'S INNER PLASTIC TUBE WOULD OVERHEAT AND SOFTEN OR MELT, IMPAIRING THROTTLE OPERATION. AN ACCIDENT COULD OCCUR IF THE MOTORCYCLE IS OPERATED AFTER OBSERVING THAT MORE EFFORT IS REQUIRED IN THE THROTTLE TWIST GRIP.