JEEP CJ5
-
JEEP CJ5 1982
ORIGINAL PRODUCTION TRANSMISSION LUBRICANT USED IN THE INVOLVED VEHICLES MAY NOT PROVIDE ADEQUATE LUBRICATION TO PROTECT THE TRANSMISSIONS FIRST GEAR.
-
JEEP CJ5 1981
SOME OF THE INVOLVED VEHICLES WERE ASSEMBLED WITH TONGUE-END REAR SEAT BELT ASSEMBLIES INSTEAD OF THE BUCKLE END AND TONGUE-END ASSEMBLIES. WITHOUT THE BUCKLE END ASSEMBLIES, THE REAR SEAT BELTS CANNOT BE FASTENED.
-
JEEP CJ5 1979
CERTAIN VEHICLES MAY HAVE AN INCORRECT GASKET BETWEEN THE TRANSMISSION AND THE TRANSFER CASE. AN INCORRECT GASKET MAY INTERFERE WITH THE NORMAL FLOW OF LUBRICANT. THIS CONDITION COULD CAUSE THE TRANSMISSION TO BECOME DAMAGED AND INOPERATIVE.
-
JEEP CJ5 1979
THE CLAMP BOLTS ON THE ADJUSTER TUBE THAT FASTENS THE CONNECTING ROD TO THE PITMAN ARM END ASSEMBLY MAY BE LOOSE. THESE LOOSE BOLTS COULD CAUSE SHIFTING OF THE STEERING WHEEL POSITION, RELATIVE TO THE STRAIGHT-AHEAD-FRONT WHEEL POSITION, AND LOSS OF STEERING.
-
JEEP CJ5 1975
VEHICLES WERE BUILT WITH WIRE CONNECTORS THAT FAIL TO ALLOW THE CURRENT FLOW NEEDED TO SUPPORT THE ELECTRONIC CONTROL OF THE ENGINE IGNITION.
-
JEEP CJ5 1976
VEHICLES WERE BUILT WITH WIRE CONNECTORS THAT FAIL TO ALLOW THE CURRENT FLOW NEEDED TO SUPPORT THE ELECTRONIC CONTROL OF THE ENGINE IGNITION.
-
JEEP CJ5 1978
THE COUPLING WHICH ATTACHES THE INTERMEDIATE STEERING SHAFT TO THE STEERING GEAR MAY HAVE OVERSIZED SERRATIONS WHICH COULD PREVENT THE COUPLING FROM BEING PROPERLY TIGHTENED IN THE STEERING GEAR SHAFT WHEN THE STEERING WHEEL IS TURNED. THIS MAY ALSO CAUSE FREE PLAY IN THE STEERING WHEEL.
-
JEEP CJ5 1977
THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH THE TRANSMISSION ADAPTER PLATE SEAL IMPROPERLY SEATED. THIS CONDITION COULD ALLOW A GRADUAL TRANSFER OF LUBRICANT FROM THE TRANSMISSION TO THE TRANSFER CASE.
-
JEEP CJ5 1978
THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH THE TRANSMISSION ADAPTER PLATE SEAL IMPROPERLY SEATED. THIS CONDITION COULD ALLOW A GRADUAL TRANSFER OF LUBRICANT FROM THE TRANSMISSION TO THE TRANSFER CASE.
-
JEEP CJ5 1976
THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH THE TRANSMISSION ADAPTER PLATE SEAL IMPROPERLY SEATED. THIS CONDITION COULD ALLOW A GRADUAL TRANSFER OF LUBRICANT FROM THE TRANSMISSION TO THE TRANSFER CASE.
-
JEEP CJ5 1976
-
JEEP CJ5 1974
-
JEEP CJ5 1975
-
JEEP CJ5 1976
-
JEEP CJ5 1973
-
JEEP CJ5 1972
-
JEEP CJ5 1974
-
JEEP CJ5 1972
-
JEEP CJ5 1972
-
JEEP CJ5 0